Vulcan RFID HDMNT-150MM Mounting Bracket

Description

Vulcan RFID HDMNT-150MM Mounting Bracket

Appropriate for indoor or outdoor mounting, the Vulcan RFID HDMNT-150MM is a heavy duty die-cast aluminum mounting bracket that articulates in both the vertical and horizontal plane. This mounting bracket kit includes all of the hardware that you will need to mount directly to a wall, pole, or uni-strut. By using worm gear hose clamps or straps (NOT included) you can use the HDMNT-150MM to mount to a bollard or utility pole. This Vulcan RFID mounting bracket is designed to mount on various Zebra and Impinj panel antennas. For more details on the compatibility of the Vulcan RFID HDMT-150MM Mounting Bracket, see the compatibility section below or contact us.

Data Sheet — Vulcan RFID  HDMNT-150MM Mounting Bracket

Quick Start Guide — Vulcan RFID HDMNT-150MM Mounting Bracket

What's included?

• Vulcan RFID HDMNT-150MM Mounting Kit Unit
• Hardware for mounting to wall, pole, or mast included

Compatibility

• Zebra AN440 (RH/LH CP) Indoor RFID Antenna (902-928 MHz)
• Zebra AN480 (RHCP) RFID Antenna (865-956 MHz)
• Zebra AN480 (LHCP) RFID Antenna (865-956 MHz)
• Zebra AN610 Slimline (LHCP) Indoor RFID Antenna (902-928 MHz)
• Zebra AN620 Slimline (LHCP) Indoor RFID Antenna (902-928 MHz)
• Impinj LHCP Far Field Antenna (FCC/ETSI)
• Impinj RHCP Far Field Antenna (FCC/ETSI)
• Invengo XC-AF26 High Gain RFID Antenna
• Laird Bistatic PRL90209 (CP) RFID Antenna (FCC)
• RFMAX S9028PCRJ / S8658PRJ (RHCP) Indoor RFID Antenna (FCC/ETSI)
• RFMAX S9028PCLJ / S8658PLJ (LHCP) Indoor RFID Antenna (FCC/ETSI)
• MIST / Juniper 4x4 MiMo Antenna # PDQ24518-MI1 (for AP41, AP43, AP61 access points)

Requirements

For the Vulcan RFID HDMNT-150MM Mounting Bracket to be used with the Zebra AN610 Slimline (LHCP), and Zebra AN620 Slimline (LHCP) RFID Antennas, the mounting bracket MUST be used in conjunction with a compatible Vulcan RFID mounting plate. The compatible mounting plates are listed below. 

• Vulcan RFID Mounting Plate for Zebra AN610
• Vulcan RFID Mounting Plate for Zebra AN620

This mounting plate requirement is ONLY for the Zebra AN610 Zebra AN620 indoor RFID antennas. A mounting plate is NOT required to mount any of the other antennas listed in the compatibility section above. 

Note: If mounting the Times-7 A6031, Times-7 B6031, or Times-7 A6032 indoor antennas, please see the Vulcan RFID HDMNT-100MM Bracket Mounting Bracket.